If you do this you have two options. Either put a piece of rubber from a balloon, latex glove etc between the screw and the screwdriver. Or use a hacksaw to put a slot in the top of the screw and use a flathead screwdriver.
I got a set, tried to use them twice and they failed both times. In the first try the bolt metal was too hard for the extrator to bite in in any reasonable time drilling and the second time the screw was too soft and the extractor stripped the hole the extractor makes attempting to extract.
I thought all my stripped screw troubles would end when I found this tip and seeing how much it’s suggested. But all that ever happens is I pierce the gripping medium due to the force required. Maybe there is a quality option that can withstand this but I’m probably buying extractors if I’m spending money at that point.
If you do this you have two options. Either put a piece of rubber from a balloon, latex glove etc between the screw and the screwdriver. Or use a hacksaw to put a slot in the top of the screw and use a flathead screwdriver.
am i the only person with a set of screw extractor bits?
I never even knew it was a thing. I’m assuming most people don’t have them.
I see sales for them all the time at hardware stores.
Forklift Mechanic, here. It indeed is, a thing.
I got a set, tried to use them twice and they failed both times. In the first try the bolt metal was too hard for the extrator to bite in in any reasonable time drilling and the second time the screw was too soft and the extractor stripped the hole the extractor makes attempting to extract.
I thought all my stripped screw troubles would end when I found this tip and seeing how much it’s suggested. But all that ever happens is I pierce the gripping medium due to the force required. Maybe there is a quality option that can withstand this but I’m probably buying extractors if I’m spending money at that point.
Another option for smaller screws is just to drill out the head, it will let go.
deleted by creator
YES BECOME FLATHEAD. ive also used torqx and pounded them in. Like a poor mans easy out, works about 20% of the time
If people don’t know the trick above then they definitely don’t know what easy out is lol. It does work and is under rated.
There is a third: manual impact driver
Arrooooo